Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 119 / 327

Commissioning
119 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
1.

Couple the shell (1) of the drawgear and align tractor and machine in a straight line.
2.

Couple the ball socket (2) of the forced steering axle.
During initial commissioning:

Set the steering rod such that the left-hand edge of the lever (3) is positioned in one line
with the right-hand edge of the orientation notch (5) if tractor and machine are in one line.
3.

Couple the propeller shaft.
4.

Connect the hydraulic system.
5.

Connect the brake system.
6.

Connect the control set with the power supply of the tractor.
7.

Switch the tractor ignition on.
The steering computer boots and carries out a power-up test, checking the SES system for
proper functioning.
Preconditions for proper execution of the power-up test:
•
Coupled forced steering axle,
•
connected hydraulic system and sufficient hydraulic pressure
(minimum 15 bar),
•
power supply of control set,
•
switched-on ignition of tractor,
•
a lowered lift axle with tridem chassis,
•
stop of tractor and machine; if the combination of tractor and
machine moves, the power-up test will be stopped and
restarted when the movement stops.
The control set displays the execution of the power-up test by acoustic and visual signals:
•
A beep is emitted twice for max. 5 seconds each.
•
The green control lamp "Steering axle locked" on the control set is flashing.
After the second beep and upon disappearance of the visual signal, the power-up test has been
successfully completed. The SES system is now ready for operation.
If the power-up test could not be successfully completed, check the display of the steering
computer (see chapter "Display in case of trouble").