Safety instructions
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
68
3.4.2.2
Use of machine
WARNING
Risk of becoming entangled, wound up and risk due to blown-
away foreign objects within the hazardous area of the powered
propeller shaft!
•
Check the safety and protective devices of the propeller shaft
for proper functioning and completeness before each startup of
the machine.
Have damaged safety and protective devices of the propeller
shaft immediately replaced by an authorised workshop.
•
Ensure that the propeller shaft guard is secured against
twisting by means of the clip chain.
•
Keep sufficient safe distance to the powered propeller shaft.
•
Make sure that people leave the hazardous area of the
powered propeller shaft.
•
Immediately switch the tractor engine off in case of emergency.
WARNING
Risk of crushing, being drawn in and becoming entangled
during operation of the machine due to powered, unprotected
driving elements!
This risk may cause most serious injuries, in particular to hands and
fingers.
•
Start the machine only with the protective devices completely
mounted.
•
It is not allowed to open protective devices
when the machine is powered,
as long as the tractor engine is running with the propeller
shaft coupled / the hydraulic system connected,
if the ignition key is in the tractor and the tractor engine
can be accidentally started with the propeller shaft
coupled / the hydraulic system connected,
if tractor and machine have not been secured against
accidental rolling by means of their respective parking
brake and/or the chocks.
Close open protective devices before powering the machine.
•
Observe the admissible driving speed of the machine before
switching the tractor's p.t.o. shaft on.
•
Acquaint yourself with all mechanisms and operating elements of the machine and their
functions before starting work! During operation it will be too late!
•
Wear close-fitting clothing! Loose-fitting clothing increases the risk of becoming entangled in or
wound up at drive shafts!
•
Ensure that the fastening elements fit properly before each startup of the machine!
•
People are not allowed:
within the turning and swivelling range of movable machine parts,
within the discharge area of the machine,
Содержание Giga-Vitesse CFS 3602
