Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 292 / 327

Service and maintenance of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 292
Set the correct distance X between the locating
points of the hydraulic cylinders (7) one after
another on the right-hand and left-hand machine
side.
1.

Hitch the machine to the tractor.
2.

Park the tractor and the empty machine on
even ground.
3.

Secure tractor and machine against
accidental starting and rolling.
Ensure that the brakes of the
machine are not applied.
4.

Connect the hydraulic hose pipes of the
levelling valve with a single-acting control
device of the tractor:
Fig. 167

Connect the pressure line of the levelling valve with a single-acting control device of the
tractor.

Connect the return line of the machine to the return line of the tractor.
The travelling height is set:
•
for the right-hand machine side by means
of the operating elements (1, 3, 5),
•
for the left-hand machine side by means of
the operating elements (2, 4, 6).
With the machine being empty,
the pressure gauges (1, 2)
display approx. 20 bar at the
levelling valve.
Fig. 168
5.

Turn the stop-cock (5 or 6) to position "UP" (increase distance X) or "DOWN" (reduce distance
X):

Press the stop button (3 or 4) to unlock the stop-cock.

Turn the stop-cock carefully as far as it will go.
6.

Hold the operating element at the tractor's control device in "Lift" position
•
until the distance X = 600±10 mm or
•
until the lower edge of the protective tube (8) is within the upper, wide marking (9).
•
The lower, narrow marking (10) should be reached with the machine being fully charged.