Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 227 / 327

Use of machine
227 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18

Press the key once to reverse the feed direction of the transport floor for 3
seconds. Thus, the pressing power which the loaded material applies to the beaters, and
the starting torque for loosening the beaters are reduced.

Press the key again.

The transport floor automatically switches to standby mode and the "Feed On" symbol is
flashing on the control set.

Switch the tractor's p.t.o. shaft on.

Let the tractor's p.t.o. shaft smoothly start to run such that the beaters are able to loosen
themselves.

The beaters start to run and after a short delay, the transport floor automatically starts.
6.

Start to move and select the travelling speed of the tractor according to the height of the desired
discharged material stack.

Switch the p.t.o. shaft off before changing the lane on the clamp silo.

The beaters and the transport floor stop. The transport floor automatically switches to
standby mode and the "Feed On" symbol is flashing on the control set if the transport
floor is not separately switched off via the soft key.

Change the lane.

Press the key again.

Switch the tractor's p.t.o. shaft on.

Let the tractor's p.t.o. shaft smoothly start to run such that the beaters are able to loosen
themselves.

The beaters start to run and after a short delay, the transport floor automatically starts.
•
During discharge, the feed rate of the transport floor can be
changed via the soft keys and .
The feed rate changes by 5 % each time the key is pressed.
•
Press the key to lower the folding drawbar during
discharge on the clamp silo.
7.

Press the soft key once to double the feed rate of the transport floor for complete
emptying.
8.

Switch the p.t.o. shaft off when the cargo space has been emptied up to the beaters.
The transport floor will not switch off if the soft key has been pressed for complete
emptying.