Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 41 / 327

Product description
41 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
As soon as the deflected sensing band reaches the highest set position, the loaded material is
conveyed to the back at maximum feed rate. The transport floor stops as soon as the front section in
the cargo space has been cleared and the loaded material no longer deflects the sensing band
upwards.
A calibration of the automatic charging system helps to separately set the lowest position of the
sensing band for switching the transport floor on and off and the highest position of the sensing band
to switch over to maximum feed rate. Observe the information in the chapter "Calibration of automatic
charging system".
2.13.3 Deactivate automatic charging system and stop transport floor
2.13.3.1 Machine without beaters
An electrical pressure switch as signal generator for the automatic charging system is mounted on the
inside of the tailgate. If the machine is fully charged:
•
the control set will generate an acoustic signal (horn sound) and a visual signal "Forage wagon
full".
•
the automatic charging system will be deactivated and the automatic feed function for the
transport floor will be switched off.
2.13.3.2 Machine equipped with beaters
The bottom beater will evade to the rear if the loaded material applies a particular pressure to this
beater. The switching plate releases an electrical pressure switch and disconnects the automatic
charging system and the hydraulic drive of the transport floor. The control set simultaneously displays
the message "Forage wagon full".
•
the control set will generate an acoustic signal (horn sound) and a visual signal "Forage wagon
full".
•
the automatic charging system will be deactivated and the automatic feed function for the
transport floor will be switched off.
These measures are intended to prevent the loaded material from being too strongly pressed against
the beaters and the beaters from becoming clogged during discharge.
During discharge, the hydraulic drive of the transport floor automatically restarts as soon as the loaded
material is no longer applying any pressure to the bottom beater.
2.14 Tailgate
The tailgate can be swivelled hydraulically and closes the cargo space on the rear side. The tailgate is
lifted and lowered by means of two hydraulic cylinders via the control set.