Safety instructions
75
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
3.4.7
Brake system
WARNING
Risk of crushing, cuts, becoming entangled, being drawn in
and risk of impact due to improper functioning of the brake
system!
The setting dimension (L) at the automatic load-sensitive brake
pressure regulator must not be modified. The setting dimension (L)
must correspond to the value indicated on the ALB plate.
If your machine is equipped with a combination of compressed-air brake system and hydraulic brake
system: Always use only one of the two brake systems during coupling!
Observe the fact that in Germany it is only allowed to use the compressed-air brake system! Hydraulic
brake systems are not licensed in Germany.
•
Only authorised workshops or recognised brake services are allowed to carry out adjustment
and repair work on the brake system!
•
Have the brake system regularly and thoroughly checked!
•
In order to maintain the operational safety, the wheel brakes must always be properly adjusted.
•
Immediately stop the tractor in case of a malfunction of the brake system. Have the failure
promptly remedied!
•
Safely park the machine and secure it against accidental rolling (chocks) before carrying out
any work on the brake system! Secure the lifted machine parts against accidental lowering!
•
Especially beware when carrying out welding and drilling work and work involving open fire in
the vicinity of brake lines!
•
Always test the brakes after any adjusting and maintenance work on the brake system!
•
The brake system of the tractor must be compatible with the brake system of the machine!
3.4.7.1
Compressed-air brake system
•
The compressed-air brake system of the tractor and the machine must be compatible!
•
Clean the sealing rings at the hose couplings of the feed and brake line from possible soiling
before coupling the feed and brake line to the tractor!
•
Only start the tractor with the hitched machine moving when the pressure gauge on the tractor
indicates 5.0 bar!
•
Drain the air reservoir every day!
•
Cover the tractor's hose couplings before carrying out journeys without machine!
•
Hang the couplings of the feed and brake line onto the provided blank connections with the
machine unhitched!
•
Do not modify the specified settings at the brake valves!
•
Replace the air reservoir if
the air reservoir can be moved in the tensioning straps,
the air reservoir is damaged,
the type plate at the air reservoir is getting rusty, is loose or is missing.
3.4.8
Axles
As a basic principle, never overload the axles. Overloading of axles reduces the service life of the axle
bearings and causes damage to the axles.
Содержание Giga-Vitesse CFS 3602
