Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 206 / 327

Operation
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 206
9.

Check the calibration. In the top position, the nominal value is 100 %. In the bottom position, the
nominal value is 0 %. Ensure proper steps between the end positions.
10.

Press the key once.
The last run working menu appears.
If the actual values do not match the nominal values , repeat the
calibration.
6.2.3.47 Set automatic charging system
Two people are required for setting the automatic charging system.
One person moves the sensing band in the cargo space, while the
other person operates the control set on the tractor.
1.

Hitch the machine to the tractor.
2.

Turn the tractor engine off.
3.

Apply the parking brake of the tractor.
4.

A second person enters the cargo space
through the access door.
5.

Switch the tractor ignition on.
6.

Press the key several times.
The screen shows:
The set-up menu for the automatic charging system appears.
7.

The person in the cargo space swivels the sensing band to the bottom position which shall be
the automatic start position for the transport floor.
8.

Press the soft key to save the lower %-value for starting the transport floor.
9.

The person in the cargo space swivels the sensing band to the top position which shall be the
start position for the transport floor running at maximum feed rate.
10.

Press the soft key to save the upper %-value for reaching the maximum transport
floor speed.
11.

Press the key once.
The last run working menu appears.