Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации, Страница: 219 / 327

Use of machine
219 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
7.3.2.2 Machines equipped with beaters
1.

The front section of the cargo space can still be topped up.
2.

Stop the charging procedure and let the p.t.o. shaft continue to run until the conveyor duct is
free from any loaded material.
3.

Switch the tractor's p.t.o. shaft off.
4.

Press the key until the pick-up has been completely lifted.
5.

Press the key once to switch on the Road Travel Mode for transport journeys on public
roads.
7.3.3 Charge with ISOBUS control / Field Operator 130
1.

Press the key once to switch on the Charge Mode on the field.

The folding drawbar moves to the preset charging position.
2.

Press the key once to lower the pick-up.

The automatic charging system is activated.
3.

Switch the tractor's p.t.o. shaft on (1000 min-1).
4.

Start charging. Select the tractor speed according to the swathe size and cutting length.
When the machine is fully charged, the ISOBUS control set generates an acoustic signal (horn
sound) and a visual signal "Forage wagon full". The automatic charging system is deactivated
and the automatic feed function for the transport floor is switched off.
7.3.3.1 Machines without beaters
1.

You can still continue to charge the machine. The feed function of the transport floor can be still
switched on for a short period of 3 seconds via the key. Stop the charging procedure
after the acoustic signal has appeared for the third time at the latest and the front section of the
cargo space is filled.
2.

Let the p.t.o. shaft continue to run until the conveyor duct is free from any loaded material.
3.

Switch the tractor's p.t.o. shaft off.
4.

Press the key to lift the pick-up.
5.

Press the key once to switch on the Road Travel Mode for transport journeys on public
roads.

The folding drawbar moves to the preset position for transport journeys.