Still RX60-25 Скачать руководство пользователя страница 99

Страница: 99 / 470

Operation

Checks and tasks before daily use

CAUTION

The seat belt may be damaged by heat!
Do not subject the buckle or belt retractor to exces-

sive heat when thawing.
– Do not use air warmer than 60°C when thawing.

Adjusting the armrest

DANGER

There is a risk of accident if the armrest lowers sud-

denly, causing the driver to move in an uncontrolled

manner. This can result in unintentional actuation

of the steering or the operating devices and thus

cause uncontrolled movements of the truck or load.
– Do not adjust the armrest while driving.
– Adjust the armrest so that all operating devices

can be actuated safely.

– Ensure that the armrest is securely tightened.

7331_342-001

Adjusting the length of the armrest

– Release the star-grip handle (1) by turning

it anti-clockwise.

– Shift the armrest (2) into the desired posi-

tion.

– Tighten the star-grip handle by turning it

clockwise.

– Check that the armrest is ﬁrmly attached.

Adjusting the height of the armrest

– Release hand wheel (3) by turning it anti-

clockwise.

– Shift the armrest (2) into the desired posi-

tion.

– Tighten the hand wheel by turning it clock-

wise.

– Check that the armrest is ﬁrmly attached.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды