Still RX60-25 Скачать руководство пользователя

Страница: 30 / 470

Foreword

Information about the documentation

Documentation scope

• Original operating instructions
• Original operating instructions for attach-

ments (variant)

• Spare parts list
• Depending on the truck equipment, "UPA"

operating instructions may also be provided

NOTE

Refer to the additional information in the

section entitled "Rules for the operating

company of industrial trucks".

These operating instructions describe all

measures necessary for the safe operation

and proper maintenance of the truck in all

possible variants available at the time of

printing. Special versions to meet customer

requirements (UPA) are documented in

separate operating instructions. If you have

any questions, please contact your authorised

service centre.

Enter the production number and year of

manufacture from the nameplate in the space

provided:

Production number:
Year of manufacture:

Please quote the production number in all

technical enquiries.
Each truck comes with a set of operating

instructions. These instructions must be

stored carefully and must be available to the

driver and operating company at all times.

The storage location is speciﬁed in the chapter

entitled "Overviews".
If the operating instructions are lost, the op-

erating company must obtain a replacement

from the manufacturer immediately.
The operating instructions are included in the

spare parts list and can be reordered as a

spare part.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды