Still RX60-25 Скачать руководство пользователя страница 28

Страница: 28 / 470

Foreword

Using the truck

The truck is suitable for indoor and outdoor

use in countries ranging from the Tropics to

Nordic regions (temperature range: -20°C to

+40°C).
If the truck is to be used in a cold store, it must

be conﬁgured accordingly and, if necessary,

approved for such an environment; see the

chapter entitled "Cold store application".

CAUTION

Batteries can freeze!
If the truck is parked in an ambient temperature of

below -10°C for an extended period, the batteries

will cool down. The electrolyte may freeze and

damage the batteries. The truck is then not ready

for operation.
– At ambient temperatures of below -10°C, only

park the truck for short periods of time.

The operating company must ensure suitable

ﬁre protection for the relevant application in

the truck's surroundings. Depending on the

application, additional ﬁre protection must be

provided on the truck. If in doubt, contact the

relevant authorities.

NOTE

Please observe the deﬁnition of the following

responsible person: "operating company".

Parking in temperatures below -10°C

CAUTION

Batteries can freeze!
If the truck is parked in an ambient temperature

below -10°C for an extended period, the batteries

will cool down. The electrolyte may freeze and

damage the batteries. The truck is then not ready

for operation.
– When the ambient temperature is below -10°C,

only park the truck for short periods of time.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды