Still RX60-25 Скачать руководство пользователя страница 309

Страница: 309 / 470

Operation

Procedure in emergencies

the truck using the mechanical brake, the

brake pedal must be pushed down further

• The truck can only be held on a slope using

the mechanical brake, not the electric brake

• No power steering effect; the steering

forces are increased by the remaining

emergency steering function

• The "Curve Speed Control" system (auto-

matic reduction in truck speed when cor-

nering) does not function The truck must be

decelerated with the mechanical brake by

pressing the brake pedal

• No hydraulic functions are available

7090_001-005

Procedure if truck tips over

DANGER

If the truck tips over, the driver could fall out and

slide under the truck with potentially fatal conse-

quences. There is a risk to life.
Failure to comply with the limits speciﬁed in these

operating instructions, e.g. driving on unacceptably

steep gradients or failing to adjust speed when

cornering, can cause the truck to tip over. If the

truck starts to tip over, do not leave the truck under

any circumstances. This increases the danger of

being hit by the truck.
– Do not release your seat belt.
– Never jump off the truck.
– You must adhere to the rules of behaviour if the

truck tips over.

Rules of behaviour if truck tips over:
– Hold onto the steering wheel with your

hands.

– Brace your feet in the footwell.
– Bend your upper body over the steering

wheel.

– Bend your body against the direction of the

fall.

56338011803 EN - 02/2019 - 09

295

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды