Still RX60-25 Скачать руководство пользователя

Страница: 184 / 470

Operation

Lifting

Changing the fork arms

DANGER

Risk of fatal injury from being run over if the truck

rolls away!
– Do not park the truck on a gradient.
– Apply the parking brake.
– Change the fork arms in a separate, safe location

on a level surface.

WARNING

There is a risk of injury when changing the fork

arms; the weight of the fork arms could cause them

to fall on your legs, feet or knees. The space to the

left and right of the fork is a danger area.
– Always wear protective gloves and safety

footwear when changing the fork arms.

– Ensure that no one stands in the danger area!
– Do not pull on the fork arms.
– The fork arms must always be carried by two

people; if necessary, use a hoist.

NOTE

•

For installation and removal, a transport

pallet is recommended for supporting

the fork arms. The pallet size depends

on the fork arm size used and should be

dimensioned such that the fork arms do not

protrude after being placed on the pallet.

This means the fork arms can be safely

placed down and transported.

•

Both fork arms can be pushed over to the

same side. It is possible to choose the side

via which the forks are removed

170

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды