Still RX60-25 Скачать руководство пользователя страница 19

Страница: 19 / 470

Foreword

Your truck

Therefore:
– Before commissioning the truck, read

the operating instructions and follow the

instructions.

– Always follow all of the safety information

contained in the operating instructions and

on the truck.

CE-Symbol

CE labelling

The manufacturer uses CE labelling to indi-

cate that the truck complies with the standards

and regulations valid at the time of marketing.

This is conﬁrmed by the issued EC declaration

of conformity. The CE labelling is attached to

the nameplate.
An independent structural change or addition

to the truck can compromise safety, thus

invalidating the EC declaration of conformity.
The EC declaration of conformity must be

carefully stored and made available to the

responsible authorities.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды