Still RX60-25 страница 249 Скачать руководство пользователя

Страница: 249 / 470

Operation

Attachments

6210_003-080

Fingertip switch

– To release the clamp locking mechanism,

push the operating lever (1) forwards.

The LED for button "F2" (2) lights up as long

as the clamp locking mechanism is released.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one

second, the clamp locking mechanism is

automatically reactivated.

– To open the clamp, push the operating lever

(1) forwards again.

It is not necessary to release the clamp locking

mechanism in order to close the clamp.
– To close the clamp, pull the operating lever

(1) backwards.

7090_860-002

Taking up a load using attachments

WARNING

Risk of accidents!
Attachments may only be used for their intended

purpose as described in the relevant operating

instructions.
Drivers must be instructed in the handling of the

attachments.

WARNING

Risk of accidents!
Loads may only be picked up and transported with

attachments if they are securely attached. Where

necessary, loads should also be secured against

slipping, rolling, falling over, swinging or tipping

over. Note that any change to the position of the

load's centre of gravity will affect the stability of the

forklift truck.
Check the capacity rating plates for the attachments

or combination of attachments.

– The rating plates show the permissible

values for:

56338011803 EN - 02/2019 - 09

235

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды