Still RX60-25, Оригинальное руководство пользователя

Страница: 428 / 470

5
Maintenance
1000-hour maintenance/yearly maintenance
WARNING
Risk of injury!
If the battery carrier is actuated while maintenance
work is being carried out, hands or feet may be
crushed.
– De-energise the truck before performing mai-
ntenance work.
WARNING
Risk of crushing!
If the support rollers swing away when the battery
is inserted, the battery carrier with the battery can
land on feet.
If the catch rails are not clean and are insufficiently
oiled, there is no guarantee that the support rollers
will lock correctly.
To ensure that the oil is evenly distributed and to test
the functionality, fully retract and then fully extend
the battery carrier once after the oiling is complete.
The support rollers must be swung out fully and
locked in position after lubrication.
NOTE
The catch rails of the support rollers are loca-
ted beneath the battery carrier. If necessary
use a mirror to gain a better view.
– Park the forklift truck on level ground.
6210_003-007
– Remove the battery, see "Replacing the
battery with the hydraulic battery carrier".
– Place the battery next to the truck so that the
battery male connector can be reinserted.
The minimum distance between the battery
and the truck must be > 0.5 m. This distance
ensures that the hydraulic battery carrier
actuation buttons can be accessed.
– Connect the battery male connector.
– Retract the battery carrier until the sup-
port rollers are directly underneath (the
battery carrier is then extended by approx.
300 mm).
– Pull out the switch key.
– Push the emergency off switch.
– Disconnect the battery male connector.
414 56338011803 EN - 02/2019 - 09
www. duma -rent.com