Still RX60-25 Скачать руководство пользователя страница 336

Страница: 336 / 470

Operation

Handling the lithium-ion battery

– Inform the ﬁre brigade that lithium-ion

batteries are affected by the ﬁre.

– Observe the information provided by

the battery manufacturer regarding the

procedure in the event of a ﬁre.

Battery weight and dimensions

DANGER

Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the sta-

bility of the truck. When replacing the battery, the

weight ratios must not be changed. The battery

weight must remain within the weight range speci-

ﬁed on the nameplate.

– Do not remove or change the position of

ballast weights.

– Observe the battery weight.

General safety regulations for lithium-ion

batteries

The following safety regulations generally

apply to operating lithium-ion batteries.
– Comply with the speciﬁcations stated

in the safety data sheets of the battery

manufacturer.

– Protect the battery against mechanical

damage to prevent internal short circuits.

– If batteries have even the slightest external

damage, dispose of them in accordance

with national regulations for the country in

which they are being used.

– Do not expose batteries directly to contin-

uously high temperatures or heat sources,

such as direct sunlight.

– Train employees in how to handle lithium-

ion batteries correctly.

322

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды