Still RX60-25 страница 408 Скачать руководство пользователя

Страница: 408 / 470

Maintenance

Preserving operational readiness

7090_342-005

– The belt tongue (2) must release when the

red button (4) is pressed.

– The automatic blocking mechanism must

be tested at least once a year:

– Park the forklift truck on level ground.
– Pull out the belt with a jerk.
The automatic blocking mechanism must

block extension of the belt.
– Tilt the seat at least 30 ° (if necessary,

remove the seat).

– Slowly extend the belt.
The automatic blocking mechanism must

block extension of the belt.

Cleaning the seat belt

– Clean the seat belt as necessary, but

without using chemical cleaning materials

(a brush will sufﬁce).

Replacement after an accident

As a rule, the seat belt must be changed after

an accident.

6327_342-010

Checking the driver's seat

WARNING

Risk of injury!
– After an accident, check the driver's seat with

attached restraining belt and fastening.

– Check the controls for correct operation.
– Check the condition of the seat (e.g. wear

on the upholstery) and secure fastening to

the hood.

WARNING

Risk of injury!
– Have the seat repaired by the service centre if

you identify any damage during the checks.

394

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды