Still RX60-25 Скачать руководство пользователя

Страница: 284 / 470

Operation

Trailer operation

7321_003-066_V2

Uncoupling model RO*245

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

– Push the hand lever (5) upwards.
– Slowly drive the truck forwards until the tow-

bar eye and towing jaws are disconnected.

– Push the closing lever (7) on the left side of

the tow coupling down as far as it will go.

The tow coupling is closed.

7321_003-067

Coupling model RO*841

NOTE

Tow coupling RO 841 is intended for a tow-bar

eye in accordance with DIN 74054 (bore

diameter 40 mm).

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

– Push the hand lever (7) upwards until it

snaps into place.

DANGER

People may be trapped between truck and trailer.
When hooking up, ensure that no one is between

the truck and trailer.

CAUTION

When being coupled, the tow-bar eye must engage

in the middle of the coupling jaw. Failure to follow

these instructions could result in damage to the

coupling jaw or to the tow-bar eye!
– Ensure that the tow-bar eye enters the coupling

jaw centrally.

– Slowly move the truck back.

270

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды