Still RX60-25 Скачать руководство пользователя страница 148

Страница: 148 / 470

Operation

Driving

5060_00

-005

Actuating the drive direction switch,

mini-console version

– For the "forwards" drive direction, push the

drive direction switch (1) forwards.

– For the "backwards" drive direction, push

the drive direction switch to the rear.

NOTE

Alternatively, the drive direction can also be

selected using the drive direction switches on

the operating devices.

Starting drive mode

DANGER

Being trapped under a rolling or tipping truck could

cause fatal injuries!
– Sit down on the driver's seat.
– Fasten the seat belt.
– Activate the available restraint systems.

Observe the information in the chapter entitled

"Safety regulations when driving".
The driver's seat is equipped with a seat

switch. This checks whether the driver's seat

is occupied. If it is not occupied or in the case

of malfunction of the seat switch, the truck

cannot be moved and all lift functions are

locked out. In such a case, the message

SEAT SWITCH

appears in the operating

unit display; see the chapter entitled "

SEAT

SWITCH

message".

– Lift the fork carriage until the necessary

ground clearance is achieved.

– Tilt the lift mast backwards.
– Release the parking brake.
– Select the desired drive direction.

134

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды