Still RX60-25 Скачать руководство пользователя страница 345

Страница: 345 / 470

Operation

Handling the lithium-ion battery

DANGER

There is a risk of damage, short circuiting and

explosion!
– Do not place any metal objects or tools on the

battery.

– Keep away from naked ﬂames.
– Do not smoke.

– Connect the battery male connector to the

plug on the battery charger.

– Start the battery charger.
The charging process starts automatically.

The display signals the charging process by

illuminating the LEDS as a chase light.
The charger indicates when the battery is fully

charged. Only disconnect the battery from the

charger if there is no current is ﬂowing.
The battery has no memory effect. Therefore,

it can be charged in any charge state without

the capacity of the battery being impaired.
At ambient temperatures below 0°C, the

charging process will take much longer.
– Observe the information in the operating

instructions for the battery and the battery

charger.

After charging

The battery charger will stop automatically.
– Disconnect the battery male connector from

the plug for the battery charger.

– Insert the battery male connector fully into

the plug connection on the truck.

CAUTION

There is a risk of short circuit if the

cables are damaged.
Do not crush the charging cable when

closing the battery cover.
– Make sure that the charging cable

does not come into contact with the

battery cover.

56338011803 EN - 02/2019 - 09

331

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды