Still RX60-25 Скачать руководство пользователя

Страница: 67 / 470

Safety

Safety regulations for handling consumables

WARNING

Battery acid contains dissolved

sulphuric acid. This is corrosive.
– When working with battery acid,

use appropriate PSA (rubber

gloves, apron, protection goggles).

– When working with battery acid,

never wear a watch or jewellery.

– Do not allow any acid to get

onto clothing or skin or into the

eyes. If this does happen, rinse

immediately with plenty of clean

water.

– In case of injury, seek medical

advice immediately.

– Immediately rinse away spilt

battery acid with plenty of water.

– Follow the statutory regulations.

ENVIRONMENT NOTE

– Dispose of used battery acid in line with the

applicable regulations.

Disposal of consumables

ENVIRONMENT NOTE

Materials that accumulate during repair,

maintenance and cleaning must be collected

properly and disposed of in accordance with

the national regulations for the country in

which the truck is being used. Work must

only be carried out in areas designated for that

purpose. Care must be taken to minimise any

environmental pollution.

– Soak up any spilt ﬂuids such as hydraulic

oil or gearbox oil immediately using an

oil-binding agent.

– Neutralise any spilt battery acid immedi-

ately.

– Always observe national regulations con-

cerning the disposal of used oil.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды