Still RX60-25 страница 325 Скачать руководство пользователя

Страница: 325 / 470

Operation

Handling the lead-acid battery

WARNING

Battery acid is toxic and corrosive!
– Observe the safety regulations in the chapter

entitled "Battery acid".

CAUTION

Risk of component damage!
Incorrect connection or operation of

the charging station or battery charger

may result in damage to components!
– Follow the operating instructions

for the charging station or battery

charger and for the battery.

CAUTION

Possibility of damaging the battery male connec-

tors!
Ensure that the key switch or battery charger is

switched off before the battery male connectors are

disconnected or connected.

NOTE

Battery maintenance is carried out in accor-

dance with the battery manufacturer's opera-

ting instructions! The operating instructions

for the battery charger must also be followed.

Only the instructions that came with the battery

charger are valid. If any of these instructions

are missing, please request them from the

dealer.

To read the battery charging state, see the

section entitled "Checking the battery charge

status".
– Park the truck securely.
– Open any protective structures fully (e.g.

fabric-covered cab).

– Open battery cover completely.
– Do not place any metal objects or tools on

the battery.

– Keep away from open ﬂames and do not

smoke.

– Check the battery cable and the charging

cable for damage, and have them replaced

56338011803 EN - 02/2019 - 09

311

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды