Still RX60-25 страница 277 Скачать руководство пользователя

Страница: 277 / 470

Operation

Trailer operation

6321_003-116

– Push the coupling pin (2) down, turn 90°

and pull out.

– Slowly move the truck forwards and guide

the tow-bar eye completely out of the

counterweight.

– Insert the coupling pin into the counter-

weight, press downwards against the spring

pressure and turn 90° (the coupling pin is

locked in this position).

Automatic tow coupling

DANGER

People may be trapped between the truck and

trailer.
When hooking up, ensure that no one is between

the truck and trailer.

DANGER

Never jack up the truck on the tow coupling or use

it for crane lifting. The tow coupling is not designed

for this and could be deformed or damaged. This

could cause the truck to fall, with potentially fatal

consequences!
– Use the tow coupling only for towing.
– For jacking up and crane loading, use only the

designated lifting points.

DANGER

The tow coupling is not designed to support loads

and could become deformed or destroyed. This

could cause the supported load to fall, with poten-

tially fatal consequences!
– The tow coupling should be subjected only to

horizontal loads, i.e. the tiller must be horizontal.

56338011803 EN - 02/2019 - 09

263

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды