Still RX60-25 Скачать руководство пользователя страница 372

Страница: 372 / 470

Operation

Cleaning the truck

– Remove any water in the chain links using

compressed air immediately after cleaning.

Move the chain several times during this

procedure.

– Immediately after drying the chain, spray it

with chain spray. Move the chain several

times during this procedure.

ENVIRONMENT NOTE

Dispose of any ﬂuid that has been spilled

or collected in the collection vessel in an

environmentally friendly manner.

– Observe the national regulations for the

country of use.

6321_003-089

Cleaning the windows

Any panes of glass, e.g. cab windows (vari-

ant), must always be kept clean and free of ice.

This is the only means of guaranteeing good

visibility.

CAUTION

Do not damage the rear window heater (inside).
– Take great care when cleaning the rear window

(1) and do not use any objects with sharp edges.

– Clean the windows.

NOTE

Cleaning can be done using a commercially

available glass cleaner.

After cleaning

CAUTION

Danger of short-circuits!
Ingress of moisture into the battery male connector

can lead to an electrical short circuit.
– Use compressed air to dry the battery male

connector before you connect the battery male

connector.

– Only connect the battery male connector if it is

dry.

358

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды