Still RX60-25 Скачать руководство пользователя страница 285

Страница: 285 / 470

Operation

Trailer operation

DANGER

If the coupling pin drops out during towing, the trailer

will work loose and can no longer be controlled.

There is a risk of accident!
A protruding safety handle means that the tow bar

eye has not been coupled correctly. The trailer

must not be towed in this condition.
– Make sure that the control pin does not protrude

from the control bush.

– Repeat the coupling process if necessary.

– Remove any items used to prevent the

trailer from rolling away.

– Tow the trailer.

Uncoupling model RO*841

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

– Push the hand lever (7) upwards.
– Slowly drive the truck forwards until the tow-

bar eye and towing jaws are disconnected.

– Close the tow coupling.

7090_900-011

Towing trailers

– Drivers who are towing a trailer for the ﬁrst

time must practise driving with a trailer in a

suitable area.

– When passing through narrow road areas

(entrances, gates etc.), observe the dimen-

sions of the trailer and load.

– When towing multiple trailers, ensure

a sufﬁcient minimum distance to ﬁxed

installations when turning and cornering.

The permissible length of the trailer trains

depends on the roadways to be driven and

may need to be determined during the test

drive.
It is the responsibility of the operating com-

pany to instruct the drivers regarding the

permissible number of trailers and, where

required, any additional speed reductions on

individual sections of the route.

56338011803 EN - 02/2019 - 09

271

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды