Still RX60-25 Скачать руководство пользователя страница 98

Страница: 98 / 470

Operation

Checks and tasks before daily use

6210_342-005

Fastening on a steep slope

The automatic blocking mechanism prevents

the belt from being extended whenever the

truck is on a steep gradient. It is not possible

to pull the seat belt any further out of the belt

retractor.
– Move away carefully on the slope.
– Fasten the seat belt.

Releasing the seat belt

7090_342-005

– Push the red button (4) on the buckle (1).
– Manually guide the belt tongue slowly back

to the retractor.

NOTE

Do not allow the seat belt to retract too quickly.

The automatic blocking mechanism may be

triggered if the belt tongue strikes the housing.

It will then no longer be possible to pull the seat

belt out with the usual force.

– Using increased force, pull the seat belt

around 10-15 mm out of the retractor to

disengage the blocking mechanism.

– Slowly allow the seat belt to retract again.
– Protect the seat belt from dirt (for example,

by covering it).

Malfunction due to cold

– If the buckle or belt retractor is frozen, thaw

them out and dry them thoroughly to prevent

recurrence.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды