Still RX60-25 Скачать руководство пользователя

Страница: 65 / 470

Safety

Safety regulations for handling consumables

WARNING

Prolonged intensive contact with the

skin can result in dryness and irritate

the skin!
– Avoid contact and consumption.
– Wear protective gloves.
– After any contact, wash the skin

with soap and water, and then apply

a skin care product.

– Immediately change soaked

clothing and shoes.

WARNING

There is a risk of slipping on spilled oil, particularly

when combined with water!
– Spilt oil should be removed immediately with

oil-binding agents and disposed of according to

the regulations.

ENVIRONMENT NOTE

Oil is a water-polluting substance!

•

Always store oil in containers that comply

with the applicable regulations.

•

Avoid spilling oils.

•

Spilt oil should be removed immediately

with oil-binding agents and disposed of

according to the regulations.

•

Dispose of old oils according to the regula-

tions.

Hydraulic ﬂuid

WARNING

These ﬂuids are pressurised during

operation of the truck and are hazar-

dous to your health.
– Do not spill the ﬂuids.
– Follow the statutory regulations.
– Do not allow the ﬂuids to come into

contact with hot engine parts.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды