Still RX60-25 Скачать руководство пользователя

Страница: 407 / 470

Maintenance

Preserving operational readiness

Maintaining the seat belt

DANGER

There is a risk to life if the seat belt fails during an

accident!
If the seat belt is faulty, it may tear or open during

an accident and no longer keep the driver in the

driver's seat. The driver may therefore be hurled

against the truck components or out of the truck.
– Ensure operational reliability by continually

testing.

– Do not use a truck with a defective seat belt.
– Only have a defective belt replaced by your

service centre.

– Only use genuine spare parts.
– Do not make any changes to the belt.

NOTE

Carry out the following checks on a regular

basis (monthly). In the case of signiﬁcant

strain, a daily check is necessary.

Checking the seat belt

6327_342-009

– Pull out the belt (3) completely and check

for wear.

The belt must not be frayed or cut. The

stitching must not be loose.
– Check whether the belt is dirty.
– Check whether parts are worn or damaged,

including the attachment points.

– Check the buckle (1) to ensure that it locks

in properly.

When the belt tongue (2) is inserted, the belt

must be held securely.

56338011803 EN - 02/2019 - 09

393

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды