Still RX60-25, Оригинальное руководство пользователя

Страница: 218 / 470

4
Operation
Attachments
1
2
Procedure for multi-lever operation
– Switch on the key switch.
– Lower the fork carriage to the ground.
– Tilt the lift mast backwards to the stop.
– Switch off the key switch.
– Actuate the operating lever (1) several
times in the direction of the arrow until the
end position is reached.
The hydraulic circuits of the first four hydraulic
functions are depressurised.
– Switch on the key switch.
– Lower the fork carriage.
– Switch on the hazard warning system
(variant).
NOTE
Press the button for switching on the hazard
warning system even if the truck is not equip-
ped with a hazard warning system. Switching
on the hazard warning system prevents the
electrical system from being switched off,
even if the key switch is subsequently swit-
ched off.
– Switch off the key switch.
The message
KEY SWITCH
appears in the
display.
– Press and hold the horizontal rocker button
for the 5th function (2).
– While holding down the button, actuate
the operating lever several times in the
different directions of the arrows until the
end position is reached.
– Press and hold the horizontal rocker button
for the 5th function (2) in the other switch
setting.
– While holding down the push button,
actuate the operating lever several times
in the different directions of the arrows until
the end position is reached.
204 56338011803 EN - 02/2019 - 09
www. duma -rent.com