Still RX60-25 Скачать руководство пользователя страница 168

Страница: 168 / 470

Operation

Driving

– The message

SWITCH OFF TRUCK?

will

appear on the display and operating unit.

To continue switching off the truck, press

the soft key (4). To abort the process for

switching off the truck, press the

ESC

(5)

soft key.

– The message

ARE YOU SURE?

appears on

the display and operating unit. To continue

switching off the truck, press the soft key

(6). The truck will now switch off. To abort

the process for switching off the truck, press

the

ESC

(7) soft key.

If switching off the truck was continued, the

truck will now be switched off and the parking

brake will not have been applied. The truck

can now be towed. If the truck is not going

to the towed, the truck must be secured with

wheel chocks to prevent it from rolling away.

DANGER

Risk of fatal injury from the truck rolling away!
The truck is not secured against rolling away be-

cause the parking brake is not applied.
– Use wheel chocks to prevent the truck from

rolling away.

– Notify the authorised service centre so that it can

repair the parking brake.

154

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды