Still RX60-25 Скачать руководство пользователя

Страница: 163 / 470

Operation

Driving

6210_00

-050_V4

Possible malfunctions

Error indication

Effect

Remedy

LED (2) in the push button (1)

ﬂashes.

Parking brake malfunction.

It cannot be guaranteed that the

parking brake has been applied

properly.

It may still be possible to

actuate the parking brake by

pressing the push button (1).

Park the truck safely.

Notify the authorised service

centre.

LED (2) in push button (1) does

not light up when the brake is

actuated.

It cannot be guaranteed that the

parking brake has been applied

properly.

Park the truck safely.

Notify the authorised service

centre.

The actuation noise is clearly

different to the normal noise or

there is no noise at all.

It cannot be guaranteed that the

parking brake has been applied

properly.

Park the truck safely.

Notify the authorised service

centre.

A warning signal is issued from

signal horn or another acoustic

warning unit in the truck.

It cannot be guaranteed that the

parking brake has been applied

properly.

Park the truck safely.

Notify the authorised service

centre.

The truck rolls even though

the parking brake has been

applied.

It cannot be guaranteed that the

parking brake has been applied

properly.

Park the truck safely.

Notify the authorised service

centre.

Display and operating unit:

Symbol: "Parking brake"

Display:

APPLY HAND-

BRAKE!

LED ﬂashes.

Parking brake is not applied

automatically.

Press and hold the push button

(1) for ﬁve seconds and then

release the push button.

The parking brake will make a

noise when it is applied.

56338011803 EN - 02/2019 - 09

149

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды