Still RX60-25, Оригинальное руководство пользователя

Страница: 363 / 470

Operation
4
Replacing and transporting the battery
6321_003-079
After extending the battery fully
– To prevent short circuits, place a rubber
mat on the battery if it has open terminals or
connectors.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the key switch is on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
– Switch off the key switch before disconnecting
the battery male connector.
– Do not disconnect the battery male connector
while the key switch is switched on, except in an
emergency.
– Switch off the key switch.
– Disconnect the battery male connector and
place it on the battery.
– Hook the battery on to suitable lifting gear.
Observe the operating instructions for the
lifting gear.
6327_003-046
– Lift the battery sideways out of the truck.
Ensure that there is sufficient distance from
the battery cover.
CAUTION
Risk of component damage!
– Do not allow slack lifting gear to fall onto the
battery cells.
DANGER
Risk of death from suspended loads!
– Never walk or stand underneath
suspended loads.
– Lift the battery out of the battery tray and set
it down carefully.
– To prevent damage to the truck when the
crane is used, ensure that the battery is set
down at a sufficient distance from the truck.
– Before inserting the battery, check that the
battery tray is free of objects.
56338011803 EN - 02/2019 - 09 349
www. duma -rent.com