Still RX60-25, Оригинальное руководство пользователя

Страница: 213 / 470

Operation
4
Handling loads
5060_003-071
Driving on lifts
The driver is only allowed to use this truck
on lifts with a sufficient load capacity and for
which the operating company (see ⇒ Chap-
ter "Definition of responsible persons", P. 26)
has been granted authorisation.
DANGER
There is a risk to life from being crushed or run over
by the truck.
– There must be no personnel already in the lift
when the truck is driven into the lift.
– Personnel are only permitted to enter the lift once
the truck is secure, and must exit the lift before
the truck is driven out.
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
kg
kg
kg
kg
kg kW
V
*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung D-22113 Hamburg
Berzeliusstr. 10
1
3
2
Determining the actual total weight
– Park the truck securely, see ⇒ Chap-
ter "Parking the truck securely and switch-
ing it off", P. 4-158.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the
attachment (variant) nameplate and, if
necessary, by weighing the load to be lifted.
– Add the determined unit weights to obtain
the actual total weight of the truck:
Tare weight (1)
+ Max. permissible battery weight (2)
+ Ballast weight (variant) (3)
+ Net weight of attachment (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for the driver
= Actual total weight
– Drive the truck with the forks forwards into
the lift without touching the shaft walls.
– Park the truck securely in the lift, see
⇒ Chapter "Parking the truck securely
and switching it off", P. 4-158, to prevent
uncontrolled movements of the load or the
truck.
56338011803 EN - 02/2019 - 09 199
www. duma -rent.com