Still RX60-25 Скачать руководство пользователя страница 209

Страница: 209 / 470

Operation

Handling loads

6210_800-011

Transporting loads

NOTE

Observe the information in the chapter entitled

"Safety regulations when driving".

DANGER

The higher a load is lifted, the less stable it beco-

mes. The truck can tip over or the load can fall,

increasing the risk of accident!
Driving with a raised load and the lift mast tilted

forward is not permitted.
– Only drive with the load lowered.
– Lower the load until ground clearance is reached

(not over 300 mm).

– Only drive with the lift mast tilted backwards.

6210_800-013

– Drive slowly and carefully round corners!

NOTE

Observe the information in the chapter entitled

"Steering".

– Always accelerate and brake gently!

NOTE

Observe the information in the chapter entitled

"Operating the service brake".

56338011803 EN - 02/2019 - 09

195

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды