Still RX60-25 страница 187 Скачать руководство пользователя

Страница: 187 / 470

Operation

Lifting

7071_00

-104_V2

Attachment

DANGER

Risk to life from falling load!
At least 60% of the length of the fork extension must

lie on the fork arm. A maximum 40% overhang over

the fork arm end is permissible. The fork extension

must also be secured against slipping from the fork

arm.
If the fork extension (1) is not secured with a secu-

ring bolt (2) and linch pin (3), the load with the fork

extension may fall.
– Push the fork extension completely to the back

of the fork.

– Make sure that 60% of the length of the fork

extension is on the fork arm.

– Always secure the fork extension with a securing

bolt.

– Always secure the securing bolt with a linch pin.

– Remove the linch pin (3) from the securing

bolt (2).

– Remove the securing bolt from the fork

extension (1).

– Push the fork extension onto the fork arms

until it is ﬂush with the fork back.

– Insert the securing bolts located behind the

fork back fully into the fork extension.

– Insert the linch pin into the securing bolt and

secure.

Removal

– Remove the linch pin (3) from the securing

bolt (2).

– Remove the securing bolt from the fork

extension (1).

– Pull the fork extension from the fork arms.
– Insert the securing bolt fully into the fork

extension.

– Insert the linch pin into the securing bolt and

secure.

56338011803 EN - 02/2019 - 09

173

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды