Still RX60-25 Скачать руководство пользователя страница 109

Страница: 109 / 470

Operation

Checks and tasks before daily use

6210_003-067_V2

Checking the vertical lift mast

position (variant) for correct function

NOTE

The function check of the lift mast vertical

position (variant) must be carried out every

time a truck is commissioned.

– Press the Softkey

(1).

The comfort feature "lift mast vertical posi-

tion" is switched on. The symbol

(2) is

displayed.
– Tilt the lift mast backwards.
The lift mast must tilt back fully and move

gently as far as the end stop.
– Tilt the lift mast forward.
The lift mast must tilt forwards and stop in the

vertical position.
– Release the operating device to tilt and

actuate again.

The lift mast must tilt forwards fully and move

gently as far as the end stop.

Zero adjustment of the load mea-

surement (variant)

NOTE

A zero adjustment must be carried out in

order to guarantee the accuracy of the load

measurement (variant) at all times. Zero

adjustment is required

•

Before daily use

•

after changing the fork arms

•

after ﬁtting or changing attachments.

NOTE

Accurate zero adjustment is only possible if

the fork is not carrying a load. Do not take up a

load yet.

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды