Still RX60-25 Скачать руководство пользователя

Страница: 303 / 470

Operation

Display messages

7325_003-054_en_V2

The shift time has been exceeded

NOTE

The shift time is adjustable.

If the key switch is switched on and the driver

does not leave the seat before the set shift

time is exceeded,

SEAT SWITCH

appears

on the display. This is also the case if an

operating device for the working hydraulics or

the accelerator pedal is actuated. Depending

on the conﬁguration, the working hydraulic

functions can be executed normally, only

slowly or not at all.
– Stand up brieﬂy from the seat, sit back down

again and fasten the seat belt.

The truck can again be operated without

restrictions.

7325_003-055_en_V3

The operating time has been exceeded

NOTE

The operating time is adjustable.

If the key switch is switched on, the parking

brake is released and the driver does not

leave the seat before the set operating time is

exceeded, and if neither the operating devices

for the working hydraulics nor the accelerator

pedal are actuated during this time,

SEAT

SWITCH

appears on the display. The truck will

not move. Depending on the conﬁguration, the

working hydraulic functions can be executed

normally, only slowly or not at all.
– Stand up brieﬂy from the seat, sit back down

again and fasten the seat belt.

The truck can again be operated without

restrictions.

OVERHEATING message

If the message

OVERHEATING

appears

on the display, the traction motors have

overheated. The acceleration and the speed

of the truck are reduced.
– Allow the truck to cool down.
– If the error persists, contact your authorised

service centre.

56338011803 EN - 02/2019 - 09

289

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды