Still RX60-25 Скачать руководство пользователя страница 344

Страница: 344 / 470

Operation

Handling the lithium-ion battery

Charging the battery

CAUTION

Risk of component damage!
Incorrect connection or incorrect operation of the

charging station or battery charger may result in

damage to components!
– Follow the operating instructions for the charging

station or battery charger and for the battery.

CAUTION

Risk of component damage!
Battery male connectors and battery charger

connectors from different manufacturers are not

compatible and may cause damage.
– Use battery male connectors and battery charger

connectors produced by the same manufacturer.

– If the connectors are from different manufac-

turers, please contact your authorised service

centre.

NOTE

To prevent deep discharge of the lithium-ion

battery, performance limitations are imposed

once the charge state of the battery drops to

a certain level. The battery must be charged

before the charge state drops below 15%.

To read the battery charge state; see the

section entitled "Checking the battery charge

status".
– Park the truck safely.
– Fully open any protective structures (e.g.

fabric-covered cab).

– Open the battery cover fully.
– Disconnect the battery male connector by

pulling the handle.

– Do not place any metal objects or tools on

the battery.

– Keep away from naked ﬂames and do not

smoke.

– Check the battery cables for damage.

If necessary, have the battery cables

replaced by the authorised service centre.

330

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды