Still RX60-25 Скачать руководство пользователя

Страница: 143 / 470

Operation

Driving

Maximum climbing capability

Maximum climbing capability [%]

Model

Type

With load

Without load

With battery

carrier

RX60-25

6345

25.5

29.7

RX60-25/600

6346

24.0

28.3

RX60-25L

6347

24.2

30.2

RX60-25L/600

6348

24.0

30.0

RX60-30

6353

21.7

29.0

RX60-30L

6354

21.9

30.6

RX60-30L/600

6355

20.9

29.3

RX60-35

6356

19.1

29.2

8.0

The upwards and downwards slopes must not

exceed the gradients listed above and must

have a rough surface.
The top and bottom of the gradient must

feature smooth and gradual transitions to

prevent the load from falling to the ground or

the truck being damaged.

Warning in the event that components

protrude beyond the truck contour

Trucks are often required to drive through very

narrow or very low spaces such as aisles or

containers. The dimensions of the trucks are

designed for this purpose. However, movable

components may protrude beyond the truck

contour and be damaged or torn off. Examples

of these components are:
• An unfolded roof panel in the driver's cab
• Open cab doors

Condition of the roadways

Roadways must be sufﬁciently ﬁrm, level and

free from dirt and fallen objects.
Drainage channels, level crossings and

similar obstacles must be evened out and,

if necessary, ramps must be provided so that

trucks can drive over these obstacles with as

few bumps as possible.

56338011803 EN - 02/2019 - 09

129

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды