Still RX60-25 Скачать руководство пользователя

Страница: 157 / 470

Operation

Driving

Cause

Effect

When the key switch is turned off:

You will hear the parking brake engage imme-

diately and the LED (2) illuminates brieﬂy with a

steady light until the control units switch off.

If the emergency off switch is actuated, following

the emergency off function:

The parking brake is applied.

6311_003-031_en_V2

If the electric parking brake has been applied,

the

PARKING BRAKE ACTIVE

message

appears on the display for ﬁve seconds.

NOTE

In order to protect the brake cable for the

parking brake, the parking brake is not always

fully applied. However under the following

circumstances the parking brake is always

fully applied:

•

The truck is stationary on a slope and

can roll away easily. The parking brake

is automatically applied fully

•

The driver wishes to fully apply parking

brake and does so by pressing the push

button for the parking brake

•

The driver switches off the truck via the key

switch

– To release the parking brake again, the

driver must sit down on the driver's seat.

– Select the desired drive direction.
– Press the accelerator pedal.
The parking brake audibly releases and the

LED (2) in the push button for the parking

brake goes out.

56338011803 EN - 02/2019 - 09

143

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды