Still RX60-25 Скачать руководство пользователя страница 387

Страница: 387 / 470

Maintenance

Safety regulations for maintenance

To prevent damage to electronic systems

with electronic components, such as an

electronic driving regulator or lift control, these

components must be removed from the truck

prior to the start of electric welding.
Work on the electrical system (e.g. connecting

a radio, additional headlights etc.) is only

permitted with approval from the authorised

service centre.

Safety devices

After maintenance and repair work, all safety

devices must be reinstalled and tested for

operational reliability.

Set values

The device-dependent set values must be

observed when making repairs and when

changing hydraulic and electrical compo-

nents. These are listed in the appropriate

sections.

Lifting and jacking up

DANGER

There is a risk to life if the truck tips over!
If not raised and jacked up properly, the truck may

tip over and fall off. Only the hoists speciﬁed in the

workshop manual for this truck are allowed and are

tested for the necessary safety and load capacity.
– Only have the truck raised and jacked up by the

authorised service centre.

– Only jack the truck up at the points speciﬁed in

the workshop manual.

The truck must be raised and jacked up for

various types of maintenance work. The

authorised service centre must be informed

that this is to take place. Safe handling of

the truck and the corresponding hoists is

described in the truck's workshop manual.

56338011803 EN - 02/2019 - 09

373

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды