Still RX60-25 Скачать руководство пользователя страница 261

Страница: 261 / 470

Operation

Auxiliary equipment

accelerator brieﬂy and then operate the

accelerator again.

• Switching on the truck in a hall

If the truck is switched on inside a hall, the

ceiling detector system detects the hall

ceiling and reduces the driving speed to the

maximum speed that is set for halls.

Possible limitations for object recognition

• If the truck moves under larger overhead

structures outdoors, e.g. a pedestrian

bridge, the ceiling sensor system may

interpret this overhead structure to be a hall

ceiling and reduce the maximum speed.

• In rare cases, it may occur that the ceiling

sensor system does not recognize a ceiling

and does not then reduce the speed. This

can happen if the signals from the ceiling

sensor are insufﬁciently reﬂected due to the

ceiling geometry; for example, if there are

large window areas at a 45° angle.

In these cases, the sensitivity and the range of

the ceiling sensor system must be adjusted.

For more information, refer to the next chapter.

Changing the sensor settings

The ceiling sensor system is supplied by

STILL with the following factory settings:
Sensitivity: High
Ceiling height: 24 m
– Pull out the connecting cable from the

sensor.

56338011803 EN - 02/2019 - 09

247

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды