Still RX60-25 Скачать руководство пользователя

Страница: 353 / 470

Operation

Replacing and transporting the battery

6327_600-001_V4

– Disconnect the battery male connector (1).

CAUTION

There is a risk of short circuit if the

cables are damaged!
Position the battery cable on the

battery in such a way that it cannot be

crushed when removing or inserting

the battery or when closing the battery

cover.
– Check the connecting cables for

damage.

– Ensure that the battery cable does

not come into contact with the

battery cover.

WARNING

Risk of crushing and shearing!
Personnel must not stand directly

next to the battery or between the

battery and the forklift truck when

removing and inserting the battery

with the forklift truck or lift truck.

WARNING

Risk of accident!
The load capacity of the truck in use must at least

match the battery weight (see battery identiﬁcation

plate).

6210_606-011

– Before picking up the battery, the fork arms

must be adjusted to match the opening

in the chassis (A). Push the fork arms

together. Maintain the maximum possible

distance between the fork arms.

Taking up the battery

CAUTION

Risk of component damage!
– The fork arms must not be moved underneath

the battery beyond the length of the opening in

the chassis.

NOTE

It is helpful if this measurement (B), measured

from the fork tips, is marked on the fork arms.

56338011803 EN - 02/2019 - 09

339

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды