Still RX60-25 страница 348 Скачать руководство пользователя

Страница: 348 / 470

Operation

Replacing and transporting the battery

The authorised service centre also adapts the

truck electrics so that they will work with the

lithium-ion batteries.
This includes:
• The cable harness
• The battery male connector and the plug

connection

• Adjusting the display-operating unit

The changeover kit is supplied on a separate

pallet. It consists of truck-speciﬁc parts that

are approved by STILL.
1

Ballast weight

Spacer plate between the ballast weight

and the counterweight

Wooden chock for securing the battery

tray

After the conversion, the authorised service

centre identiﬁes the truck with an additional

nameplate.

WARNING

Risk to stability!
If this changeover kit is not ﬁtted, it will not be

possible to lock the lithium-ion battery into place,

which will result in unintended movement in the

battery compartment.
– The conversion must be performed only by the

authorised service centre.

– Only use lithium-ion batteries that have

been approved by STILL for use with this

truck.

NOTE

The use of lead-acid batteries is only possible

after the conversion to lithium-ion batteries if

the truck is converted back again.

334

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды