Still RX60-25, Оригинальное руководство пользователя

Страница: 370 / 470

4
Operation
Cleaning the truck
CAUTION
Excessive water pressure or water and steam that
are too hot can damage truck components.
– Adhere strictly to the following steps.
CAUTION
Abrasive cleaning materials can damage the surfa-
ces of components!
Using abrasive cleaning materials that are unsuita-
ble for plastics can cause plastic parts to dissolve
or become brittle. The screen on the display-opera-
ting unit could become cloudy.
– Adhere strictly to the following steps.
– Park the truck safely.
– Switch off the key switch.
– Disconnect the battery male connector.
– Do not spray electric motors and other
electrical components or their covers
directly with water.
– Use only high-pressure cleaners with a
maximum output power of up to 50 bar and
85°C.
– If a high-pressure cleaner is used, maintain
a distance of at least 20 cm between the
nozzle and the object being cleaned.
– Do not aim the cleaning jet directly at
adhesive labels or decal information.
– Remove all deposits and accumulations
of foreign materials in the vicinity of hot
components.
– Use only non-flammable fluids for cleaning.
– Note the manufacturer's guidelines for
working with cleaning materials.
– Clean plastics only with cleaning materials
intended for plastics.
– Note the manufacturer's guidelines for
working with cleaning materials.
– Clean the truck exterior using water-soluble
cleaning materials and water. Cleaning
with a water jet, a sponge or a cloth is
recommended.
– Clean all accessible areas.
356 56338011803 EN - 02/2019 - 09
www. duma -rent.com