Still RX60-25, Оригинальное руководство пользователя

Страница: 381 / 470

Operation
4
Decommissioning
– To relieve the strain on the load chains,
lower the fork onto a suitable supporting
surface, e.g. a pallet.
– Check the hydraulic oil level. Top the oil up
if necessary.
– Apply a thin layer of oil or grease to all
uncoated moving parts.
– Lubricate the truck.
– Lubricate the joints and controls.
– Lubricate the slide elements and guides of
the hydraulic battery carrier (variant); see
the section entitled "Lubricating the slide
elements" in the chapter entitled "1000-hour
maintenance/annual maintenance".
– Lubricate the catch rail of the hydraulic
battery carrier (variant); see the section
entitled "Oiling the catch rails" in the chapter
entitled "1000-hour maintenance/annual
maintenance".
– Lubricate the battery interlock and the
battery cover; see the section entitled
"Checking the battery interlock and battery
cover" in the chapter entitled "Remaining
ready for operation".
CAUTION
Risk of component damage!
If you remove the battery male connector with the
key switch switched on (under load), an arc will be
produced. This can cause the contacts to erode,
which considerably shortens their service life.
– Switch off the key switch before disconnecting
the battery male connector.
– Do not disconnect the battery male connector
while the key switch is switched on, except in an
emergency.
– Disconnect the battery male connector.
– Check the battery condition, acid level and
acid density.
– Service the battery.
NOTE
Store only fully charged batteries.
56338011803 EN - 02/2019 - 09 367
www. duma -rent.com