Still RX60-25 Скачать руководство пользователя

Страница: 318 / 470

Operation

Handling the lead-acid battery

Safety regulations for handling the

battery

– National statutory provisions for the country

of use must be followed when setting up and

operating battery charging stations.

CAUTION

Risk of component damage!
Incorrect connection or incorrect

operation of the charging station or

battery charger may result in damage

to components.
– Follow the operating instructions

for the charging station or battery

charger and for the battery.

– Observe the following safety regulations

when maintaining, charging and changing

the battery.

Maintenance personnel

Batteries may only be charged, maintained

or replaced by properly trained personnel

in accordance with the instructions from the

manufacturers of the battery, battery charger

and truck.
– Follow the handling instructions for the

battery and the operating instructions for

the battery charger.

WARNING

Risk of crushing/shearing!
The battery is very heavy. There is a

risk of serious injury if any parts of the

body are caught under the battery.
There is a risk of injury if any parts

of the body are wedged between the

battery cover and the edge of the

chassis when the battery cover is

closed.
– Always wear safety shoes when

replacing the battery.

– Only close the battery cover if there

is no part of the body between the

battery cover and the edge of the

chassis.

304

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Похожие инструкции для RX60-25

Бренды по названию

Популярные бренды