Still RX60-25 Скачать руководство пользователя страница 279

Страница: 279 / 470

Operation

Trailer operation

WARNING

Risk of component damage if the tiller in the tow

coupling is tilted!
The tiller should be kept as horizontal as possible

when towing. This ensures that the rotation range

is sufﬁcient at the top and bottom. The authorised

service centre can adjust the assembly height for

the tow coupling to the tiller height if necessary.
– Make sure that the tiller is level.
– To change the coupling height, contact the

authorised service centre.

7090_900-008

Coupling model RO*243

NOTE

Tow coupling RO 243 is intended for a tow-bar

eye in accordance with DIN 74054 (bore

diameter: 40 mm).

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks (1).

– Adjust the tow bar eye of the tiller so that it is

at the centre of the towing jaws.

7321_003-064

– Pull out the safety handle (3).
– Push the hand lever (2) upwards.

DANGER

Persons may become trapped between the truck

and trailer.
When hooking up, ensure that no one is between

the truck and trailer.

CAUTION

When being coupled, the tow-bar eye must engage

in the middle of the coupling jaw. Failure to follow

these instructions could result in damage to the

coupling jaw or to the tow-bar eye!
– Ensure that the tow-bar eye enters the coupling

jaw centrally.

– Slowly move the truck back.

56338011803 EN - 02/2019 - 09

265

www.

duma

-rent.com

Содержание RX60-25























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды

Still RX60-25, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-25

Отзывы:

Бренды по названию

Популярные бренды