manualshive.com logo in svg

Sharp AR-M550N, Руководство по обслуживанию, Страница: 97 / 460

Поделиться
Скачать
Sharp AR-M550N Скачать руководство пользователя страница 97

AR-M550/M620/M700  DETAILS OF EACH SECTION  6 - 42

a-3. Paper guides

1) Remove the relay pass unit. (See “a. Relay pass unit” in this sec-

tion)

2) Remove the lower paper guide unit. (See “a-2. Lower paper guide

unit” in this section)

3) Clean the paper guides.

a-4. Transport roller 3 (Drive)

a-5. Transport roller 4 (Drive)

1) Remove the relay pass unit. (See “a. Relay pass unit” in this sec-

tion)

2) Remove lower paper guide unit. (See “a-2. Lower paper guide unit”

in this section)

3) Remove the rear positioning plate, and remove the paper feed port

PG of the paper feed tray 1 and 2.

4) Remove the bearing, the belt, and the relay pass drive shaft unit.

5) Remove the transport roller 3 and 4 (Drive).

6) Remove the E-ring from transport roller 3 and 4 (Drive), and

remove the belt pulley.

a-6. Transport roller 2 (Drive)

1) Remove the relay pass unit. (See “a. Relay pass unit” in this sec-

tion)

2) Remove the lower paper guide unit. (See “a-2. Lower paper guide

unit” in this section)

3) Remove the rear positioning plate, and remove the paper feed PG

of the paper feed tray 1/2. (See “a-4. Transport roller 3 (Drive)” in
this section)

4) Remove the paper entry side upper plate.

5) Remove the E-ring, and remove the gear and the belt pulley.

6) Remove the transport roller 2 (Drive) unit. 

7) Remove the E-ring from the transport roller 2 (Drive). 

Содержание AR-M550N













































































































































































































































































































































































































































































Отзывы:

Нет отзывов